-
350A Relay BMS 4S-35S Peak 2000A For LiPo LiFePO4
The relay BMS can be one of the perfect solution for large vehicle starting power, engineering vehicle, low speed four-wheel vehicle, RV or any other device you want to place it in.
It supports 500A continuous current output, and the peak current can reach 2000A. It is not easy to be heated or damaged. If damaged, the main control will not be affected. You only need to replace the relay to reduce maintenance costs. You can also develop your own application system according to your own needs. We can provide BMS interface communication protocol.
We’ve done several successful solar energy storage project. Contact us if you want to build your high voltage system!
-
High Voltage BMS 40S-234S 100A 300A For Solar Power Storage
This high voltage BMS is one of the perfect solutions for your RV/car/solar power storage. You can choose from 40S to 234S for your Li-ion or LFP batteries. With built-in charging and discharging independent control system, you can view the battery pack health condition in real time. It can support sustainable current 300A, instant current 1000A.
With a convenient connector design, it is convenient for you to connect the main board and the slave board directly, and it is not easy to make mistakes with digital correspondence. The number of slave boards will depend on the strings you need.
-
3-32S Smart Relay BMS 96V 500A with BT/CAN/RS485
The smart relay BMS can be one of the perfect solution for large vehicle starting power, engineering vehicle, low speed four-wheel vehicle, RV or any other device you want to place it in.
It supports 500A continuous current output, and the peak current can reach 2000A. It is not easy to be heated or damaged. If damaged, the main control will not be affected. You only need to replace the relay to reduce maintenance costs. You can also develop your own application system according to your own needs. We can provide BMS interface communication protocol.
We’ve done several successful solar energy storage project. Contact us if you want to build your high voltage system!
-
High Voltage BMS Relay 400V 800V 500A 1000A with CAN/RS485
The master-slave battery management system can monitor the cell voltage, battery pack total voltage, cell temperature, charge and discharge current and other parameters of the lithium battery system in real time and with high precision, and perform rapid analysis and processing to provide the corresponding lithium battery overcharge , over-discharge, over-current, over-temperature, short-circuit and other protection mechanisms to ensure the safe and reliable operation of the lithium battery system and prolong the service life of the lithium battery.
Application: large vehicle starting power, solar energy storage, engineering vehicle, low speed four wheeled vehicle, RV or any other device you want to place it in.
Chengdu Heltec Energy Technology Co., Ltd.
High Voltage / Relay BMS
If you want to place an order directly, you can visit our Online Store.