page_banner

BMS

If you want to place an order directly, you can visit our Online Store.

  • Smart BMS 4-8S 12V LiFePO4 100A 200A

    Smart BMS 4-8S 12V LiFePO4 100A 200A

    Smart BMS supports BT communication function with mobile APP (Android/IOS). You can check battery status in real time through APP, set protection board working parameters, and control charge or discharge. It can accurately calculate remaining battery power and integrate based on current time.

    When in storage mode, the BMS won’t consume the current of your battery pack. To prevent the BMS from wasting power for a long time and damaging the battery pack, it has an automatic shutdown voltage. When the cell falls below the voltage, the BMS will stop working and automatically shut down.

     

  • High Voltage BMS Relay 400V 800V 500A 1000A with CAN/RS485

    High Voltage BMS Relay 400V 800V 500A 1000A with CAN/RS485

    The master-slave battery management system can monitor the cell voltage, battery pack total voltage, cell temperature, charge and discharge current and other parameters of the lithium battery system in real time and with high precision, and perform rapid analysis and processing to provide the corresponding lithium battery overcharge , over-discharge, over-current, over-temperature, short-circuit and other protection mechanisms to ensure the safe and reliable operation of the lithium battery system and prolong the service life of the lithium battery.

    Application: large vehicle starting power, solar energy storage, engineering vehicle, low speed four wheeled vehicle, RV or any other device you want to place it in.

  • Smart BMS 8-20S 40A 100A 200A Bluetooth For Lithium Battery

    Smart BMS 8-20S 40A 100A 200A Bluetooth For Lithium Battery

    Smart BMS supports BT communication function with mobile APP (Android/IOS). You can check battery status in real time through APP, set protection board working parameters, and control charge or discharge. It can accurately calculate remaining battery power and integrate based on current time.

    When in storage mode, the BMS won’t consume the current of your battery pack. To prevent the BMS from wasting power for a long time and damaging the battery pack, it has an automatic shutdown voltage. When the cell falls below the voltage, the BMS will stop working and automatically shut down.